CONTROLLINO MINI - 5V and 3V pins current

Stuck? We'll be happy to help!
Post Reply
zanellato
Posts: 1
Joined: Thu May 02, 2019 4:30 pm

CONTROLLINO MINI - 5V and 3V pins current

Post by zanellato » Thu May 02, 2019 4:40 pm

Hello..

Into data sheet I guessed that maximum current for 5V and 3V pins (pin header) are 200mA.

It is right?

Is it possible to use a 3V peripherals on pin header interface or TTL hight levels are not compatibles?

Best regards.

Andrea

User avatar
Jarda
Posts: 7
Joined: Fri Dec 14, 2018 10:52 am

Re: CONTROLLINO MINI - 5V and 3V pins current

Post by Jarda » Mon May 06, 2019 1:21 pm

Hello zanellato,
yes, power pins on pinheader are limited to 200 mA in total, not every pin.

3V3 peripheral will not work because ATMEGA2560 is powered from 5V and will not work with 3V3 level device even when device is tolerant. In case of input, level for processor will be too low. When you will use device which is 5V tolerant, you can use it only, when the external device has no output to the processor.

The best way will be to use levelshifter.

BR
Jarda

Post Reply