Controllino and DELTA 103WQ

Post Reply
Posts: 1
Joined: Thu Jun 06, 2019 9:17 pm

Controllino and DELTA 103WQ

Post by wplarthshkr » Thu Jun 06, 2019 9:21 pm

Hi, I want to make a project with controllino MAxi and a HMI screen in Delta 103WQ. I'm using modbus, but I cant communicate both devices. I use the example code to HMI RS485 interface but it doesnt work. Can anyone help me with this problem?

User avatar
Posts: 34
Joined: Tue Dec 18, 2018 3:44 pm

Re: Controllino and DELTA 103WQ

Post by Lukas » Thu Jun 13, 2019 2:27 pm


in general, we strongly recommend following procedure to bring your Modbus setup into live:
  • Try to run the setup with a PC as the Modbus Master.
  • There exists some free to use Modbus Master applications for PC.
  • In this way you can be really sure that you have correct cabling, you have correctly setup addresses of the slave devices and you are using correct Register numbers.
  • Once it is working, then you can start the integration with CONTROLLINO.
Good luck!

Post Reply